PP Series 60 Inks

Pardad Rang Kahroba Series 60 inks are high-quality inks specifically designed for flexographic printing. This solvent-based ink series is suitable for PP woven sacks. This ink series is specifically formulated for reverse printing; it is not suitable for laminated prints.

Technical Specifications:

• High color strength
• High abrasion and scratch resistance
• High adhesion
• Superior ink transfer
• High heat resistance
• Suitable for high-speed printing
• Micro printing
• Fine print resolution
• Good solubility
• Heat resistance: 140-160 degrees Celsius
• Very good chemical resistance

Viscosity Adjusting Solvent: Pardad Rang Kahroba's ready-to-use solvent or a mixture of ethyl acetate and isopropyl alcohol. Pardad Rang Kahroba's ready-to-use solvent is suitable only for flexographic printing systems.

• Flexo system: 80% anhydrous isopropyl alcohol or ethanol + 20% ethyl acetate (1:4 ratio)
• The mentioned ratios are approximate, and the exact values depend on various conditions. To slow down the drying of the ink, use ethyl glycol or methoxy propanol. To speed up the drying of the ink, use ethyl acetate.
• Flexo printing viscosity: 22-25 seconds at 25 degrees Celsius with a Ford Cup No. 4

Mix thoroughly before use.

Hue: Based on the shades available in the catalog, to reduce the shade of the inks, use Series 60 varnish.

Packaging: Colored inks in 20 kg polyethylene containers, white ink in 25 kg containers, or one-ton polyethylene pails.

• Storage: Store in a cool, dry place away from heat sources. Store at temperatures between 10 and 35 degrees Celsius. Avoid direct sunlight on ink containers. Keep containers tightly closed.
• With proper storage, the product has a shelf life of one year. Metallic inks should be used within three months to ensure optimal performance.